Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.

Micron 5200 PRO 960 GB 2.5" Serial ATA III 3D TLC

SKU
MTFDDAK960TDD-1AT1ZABYY
Login for pricing
In stock
SATA 6 Gb/s, Hot-plug, 2.5", RoHS, 960 GB, 1-3 DWPD
Micron’s 5200 solid state drive (SSD) uses a single-chip controller with a SATA interface
on the system side and four channels of Micron NAND Flash internally. Available in the
2.5-inch form factor, the SSD integrates easily in existing storage infrastructures.
The SSD is designed to use the SATA interface efficiently during both READs and
WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced
boot times, faster application load times, reduced power consumption and extended
reliability.
The self-encrypting drive (SED) features an AES-256 encryption engine, providing hardware-based,
secure data encryption, with no loss of SSD performance. This SED follows
the TCG Enterprise specification for trusted peripherals. When TCG Enterprise features
are not enabled, the device can perform alternate data encryption by invoking the ATA
security command set encryption features, to provide full disk encryption (FDE) managed
in the host system BIOS. TCG Enterprise and ATA security feature sets cannot be
enabled simultaneously.
The data encryption is always running; however, encryption keys are not managed and
the data is not secure until either TCG Enterprise or ATA security feature sets are enabled.
SKU MTFDDAK960TDD-1AT1ZABYY
EAN 0649528785732
Specification
Hard drive
SSD capacity960 GB
Memory type3D TLC
Bytes per sector512
Data transmission
Random write (4KB)32000 IOPS
Random read (4KB)95000 IOPS
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
Endurance
Mean time between failures (MTBF)3000000 h
Features
InterfaceSerial ATA III
Component forPC/Laptop
End-to-End Data ProtectionYes
Hot-swapYes
SSD capacity960 GB
Memory type3D TLC
Bytes per sector512
Random write (4KB)32000 IOPS
Random read (4KB)95000 IOPS
Mean time between failures (MTBF)3000000 h
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
SSD form factor2.5"
Power
Power consumption (idle)1.5 W
Performance
InterfaceSerial ATA III
Component forPC/Laptop
End-to-End Data ProtectionYes
Hot-swapYes
SSD capacity960 GB
Memory type3D TLC
Bytes per sector512
Random write (4KB)32000 IOPS
Random read (4KB)95000 IOPS
Mean time between failures (MTBF)3000000 h
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
Design
Component forPC/Laptop
SSD form factor2.5"
Weight & dimensions
Weight70 g
Package width69.8 mm
Package depth100.5 mm
Package height7 mm
Packaging data
Package width69.8 mm
Package depth100.5 mm
Package height7 mm
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Non-operating shock15000 G
Technical details
InterfaceSerial ATA III
Hot-swapYes
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Non-operating shock15000 G
SSD form factor2.5"
Compliance certificatesRoHS
Other features
Compliance certificatesRoHS
Manufacturer Micron
In Stock Y